Our Companies
PAG Manufacturing / DER Services – Oklahoma City, OK
AVIONICS – COMPONENTS – ENGINES – MANUFACTURING/DER
Maintenance, Repair, Overhaul (MRO) Services
PAG is dedicated to keeping mission critical, business, military, and defense operators in the air.
Rely on PAG for:
- Fixed- and rotor-wing MRO services
- Immediate customer access to flight-ready parts
- Unmatched supply chain solutions worldwide
- Before and after support included with every sale and service
- Around the world and around the clock availability
CeralUSA (CER)
Our Oklahoma City location specializes in the design and development of environmentally friendly engineered coatings that protect substrates from corrosion and erosion.
All coating products are made in the USA and are shipped worldwide from our factory in Oklahoma City.
Whether you’re shopping for environmental alternatives, need an engineering development partner for your product, opening a coating shop, or looking for a qualified provider to do the work for you, CeralUSA is ready to provide your coating solution.
Coating Specialties
Ceramic Aluminum Coatings provide galvanic corrosion resistance and oxidation resistance in an ultra smooth and lightweight coating.
Topcoats & Sealers work with ceramic aluminum coatings to reduce porosity and improve surface finish.
Diffusion Coatings provide exceptional oxidation and sulfidation protection.
Environmentally Friendly
CeralUSA was built on a foundation of logic and environmental principles and is committed to the identification, development and distribution of protective coatings that are safer for workers and for the environment.
CeralUSA diffusion coatings contain no chrome and no phosphorous, resulting in no phosgene gas.
CeralUSA offers a variety of low- and non-chrome coatings that do not sacrifice performance properties.
AS9100C compliant | ISO 9001:2008 Company
YOU NEED TO KNOW:
Hexavalent chromium is a known carcinogen that is prevalent in leading competitor coatings.
Legacy diffusion coatings emit deadly phosgene gases during heat treat.
Aluminum Ceramic Coatings – Application
Used primarily to protect against corrosion and erosion on steel parts operating up to 1100°F, CeralUSA’s Aluminum Ceramic Coatings provide a barrier between the substrate and the environment and can be made conductive to provide galvanic and sacrificial protection. They are resistant to hydraulic fluids, fuel and hot water, thermal shock and impact damage, and can be applied using conventional spray, dip and brush techniques.
Qualified Coating Services (QCS) is the CeralUSA approved application services company. QCS specializes in the application of aluminum slurry coatings for the aerospace, industrial gas turbine, automotive, and oil & gas industries.
ALL coatings applied by QCS are CHROME-FREE, REACH-compliant, environmentally-friendly, and designed to replace legacy hazardous coatings in use today.
Products
Aluminum Ceramic Coatings
Used primarily to protect against corrosion and erosion on steel parts operating up to 1100°F, CeralUSA’s Aluminum Ceramic Coatings provide a barrier between the substrate and the environment and can be made conductive to provide galvanic and sacrificial protection. They are resistant to hydraulic fluids, fuel and hot water, thermal shock and impact damage, and can be applied using conventional spray, dip and brush techniques.
Ceral 66XL
Our revolutionary new completely chrome-free, non-hazardous aluminum silicate coating passes the most stringent OEM specifications.
Ceral® 34 aka Ceral® 34SC
Our most popular product, low-chrome Ceral 34 is proven to perform better than or equal to competitive products and is approved by multiple OEMs. NSN 8030-01-571-1611 (6850-01-571-1611)
Ceral® 114
A predecessor of Ceral 34, low-chrome Ceral 114 is approved by multiple OEMs.
Top Coats and Sealers
CeralUSA’s Top Coats and Sealers are designed to improve corrosion resistance, surface finish, and longevity of CeralUSA’s Aluminum Ceramic Coatings. Versatility is an added bonus, as these coatings are available in a quick release variety as well as in a wide array of colors.
Ceral® 50
Zero hex-chrome Ceral 50, when used as a top coat for Ceral 34, has been proven to perform equal to or better than competitive products and is approved by multiple OEMs. Available with PTFE and/or Pigment. NSN 8030-01-571-1607 (6850-01-571-1607)
Ceral® VPW 350/1
Ceral VPW 350/1 was designed as a top coat for Ceral 114 and is approved by multiple OEMs.
Diffusion Coating Products
Used primarily to protect against corrosion and erosion on parts operating up to 1830°F, CeralUSA’s diffusion coating products are the environmentally friendly, more cost effective replacement for antiquated processes such as pack cementation, chemical vapor deposition, plasma spray, electron beam evaporation and electroplating. Our diffusion slurries are produced in plain and silicon modified aluminide formulations.
LSR® H2O Sialoy 2-Part
The diffused LSR H2O Sialoy coating provides the same protection as the original LSR Sialoy however it’s built on a water-based binder. Some customers prefer this water-based binder as it makes LSR H2O a drop-in replacement for the legacy diffusion coatings they’re accustomed to. LSR-H2O contains neither hazardous ingredients nor does it produce hazardous by-products as a result of being diffused. Now furnished in two parts for local mixing. NSN 8030-01-593-7078
Ceral® 10 Green
Ceral 10 Green is a solvent based slurry diffusion aluminide coating specifically designed to protect superalloys. Ceral 10 Green provides excellent protection against erosion, high temperature oxidation as well as high temperature and low temperature corrosion. Ceral 10 Green is entirely chrome-free. Approved to P&W PWA 596-3.
Ceral® 10
Ceral 10 is a silicon doped slurry diffusion aluminide coating specifically designed to protect superalloys. Ceral 10 provides excellent protection against erosion, high temperature oxidation as well as high temperature and low temperature corrosion. Ceral 10 contains a small amount of Cr6+.
CeralUSA Rolling Machine | Product Brochure
CeralUSA promotes the use of proper equipment for the storage, preparation, application and finishing of our engineered coatings.This light weight, low profile roller unit was designed as a compact, space saving instrument which may be used continuously to keep product solids in suspension.
Product Briefs | MSDS | Technical Bulletins
FAA Approved Processes
| OEM | Process | Description |
| Pratt & Whitney | SPOP 141 | Application of PWA 36595 Coating |
| Pratt & Whitney | SPOP 144 | Coating Touch-up and Repair |
| Pratt & Whitney | SPOP 147 | Application of Inorganic Coatings |
| Pratt & Whitney | SPOP 150 | Anti-Gallant |
| Pratt & Whitney | SPOP 160 | Anti-Gallant |
| Pratt & Whitney | SPOP 162 | Application of PWA 110 Coatings |
| Pratt & Whitney | SPOP 164 | Application of PWA 595 Coatings |
| Pratt & Whitney | SPOP 19 | Plastic Media Blast |
| Pratt & Whitney | SPOP 203 | Coating Strip |
| Pratt & Whitney | SPOP 208 | Solvent Degreasing |
| Pratt & Whitney | SPOP 209 | Aqueous Degreasing |
| Pratt & Whitney | SPOP 21 | Cadmium Strip |
| Pratt & Whitney | SPOP 218 | Dry Abrasive Grit Blast |
| Pratt & Whitney | SPOP 25 | Nickel Cadmium Strip |
| Pratt & Whitney | SPOP 258 | Coating Strip |
| Pratt & Whitney | SPOP 500 | Glass Bead Peen |
| Pratt & Whitney | PWA 110 | Application of Inorganic Coatings |
| Pratt & Whitney | PWA 36252 | Coating, Aluminum, Heat & Corrosion Resistant |
| Pratt & Whitney | CPW420 | Application of Inorganic Coatings |
FAA & EASA Approved
PAG repair stations are certified by FAA, EASA, Transport Canada, ANAC, and CASA Authorities.
Global Company Resources
Customer support for PAG Parts and MRO services worldwide.
Contact us for Immediate access to PAG’s flight-ready parts inventory.
PAG Certified Parts
Access our global inventory of Avionics, Component, and Engine
flight-ready spares.
A Dream Come True
Meet Greg Engleman, General Manager CeralUSA & Qualified Coating Services
…Greg continued to take advantage of learning opportunities at Oak Ridge, earning a Masters in Material Science and Engineering from the UT Space Institute. Joining CeralUSA was an opportunity to work in aviation using everything he had learned.
Read More
Improving Aircraft Performance with Eco-Friendly Coatings
Traditional coatings such as paints, primers, and sealants, often contain volatile organic compounds (VOCs) and heavy metals, which pose environmental and health risks.
Eco-friendly engineered coatings are designed to improve aircraft performance during production, application, and throughout the aircraft’s operational life.